I upgraded my 1.4.18 to 1.4.21 and after doing some plugin reinstalls to bring the menus back I need to reboot Raqcop and not it is locked up
Checking Memory: done
Press spacebar to enter ROM mode
Booting default method - From disk
First stage kernel (Linux): Decompressing - done
ERROR: cannot relocate with filesize 0
Second stage kernel: Decompressing - done
ERROR: cannot relocate with filesize 0
Linux version 2.4.36-cobalt (root@binford2000) (gcc version 3.3.3) #1 Tue Jul 22
20:09:45 GMT 2008
BIOS-provided physical RAM map:
BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
BIOS-e801: 0000000000100000 - 0000000020000000 (usable)
0MB HIGHMEM available.
512MB LOWMEM available.
On node 0 totalpages: 131072
zone(0): 4096 pages.
zone(1): 126976 pages.
zone(2): 0 pages.
DMI not present.
Kernel command line: console=ttyS0,115200 ip=off
Initializing CPU#0
Detected 448.219 MHz processor.
Calibrating delay loop... 894.56 BogoMIPS
Memory: 516288k/524288k available (960k kernel code, 7612k reserved, 232k data,
60k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
CPU: AMD-K6(tm)-III Processor stepping 04
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Initializing Cobalt ACPI driver.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 00:0f.0
ALI15X3: chipset revision 193
ALI15X3: 100% native mode on irq 14
ide0: BM-DMA at 0xfdd0-0xfdd7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfdd8-0xfddf, BIOS settings: hdc:DMA, hdd:DMA
hda: ST320410A, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0 at 0xfdf8-0xfdff,0xfdf6 on irq 14
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(33)
Partition check:
hda: hda1 hda2 hda4
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 131072 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 60k freed
frandom: Seeded global generator now (used by erandom)
INIT: version 2.86 booting
Mounting /proc filesystem
Setting hostname
Loading /usr/share/kbd/keymaps/i386/qwerty/us.map.gz
Couldnt get a file descriptor referring to the console
Initializing Power Management
Initializing USB controllers
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xe0817000, IRQ 6
usb-ohci.c: usb-00:02.0, PCI device 10b9:5237
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
Initializing USB storage devices
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
Initializing USB keyboard
modprobe: Can't locate module keybdev which is needed for hid
modprobe: Can't locate module keybdev
Initializing USB modems
usb.c: registered new driver acm
acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters
e2fsck 1.40.11 (17-June-2008)
/dev/harddisk4: clean, 11278/611648 files, 84619/1220940 blocks
Checking root filesystem: Success
Mounting root read/write
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal
e2fsck 1.40.11 (17-June-2008)
/dev/harddisk1: clean, 38/4016 files, 4368/16064 blocks
e2fsck 1.40.11 (17-June-2008)
/dev/harddisk2: recovering journal
/dev/harddisk2: clean, 8350/1827840 files, 153772/3650771 blocks
Checking other filesystems: Success
Mounting other filesystems
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Turning on swap
Adding Swap: 32764k swap-space (priority -1)
Updating System.map file location
Updating /etc/fstab to reflect removable devices
Setting kernel settings
Setting locale
Setting consolefonts
Couldnt get a file descriptor referring to the console
Couldnt get a file descriptor referring to the console
Couldnt get a file descriptor referring to the console
GCouldnt get a file descriptor referring to the console
Update modules dependencies when necessary
Clearing old files
Setting the clock
Initializing random number generator
Running isapnp
https certificate issuer match raqcop.local
Rotating logs
error: /etc/logrotate.conf:123 duplicate log entry for /var/log/mNW/mnw.log
Starting syslogd
Starting klogd
Running /etc/rc.d/rc.network
Setting up loopback
Loading MASQ helper modules
Setting up IPCOP firewall rules
Bareword "myNetWatchMan" not allowed while "strict subs" in use at /var/ipcop/he
ader.pl line 132.
Compilation failed in require at /usr/local/bin/puzzleFwRules.pl line 40.
Setting up IP Accounting
after 12 hours it has not gotten past this part can i reinstall and still keep my logs or can i remove the problem update witch i think was mynetwatchman
http://mh-lantech.css-hamburg.de/ipcop/download.php?view.13
