RAQCOP = IPCop + Cobalt Raq, Cobalt Raq Firewall Applicance Software, Velociraptor Software Upgrade.

raqcop.com > Installation > Raq3 and Raq4 > can't login

Pages: [1]

« previous next »

Author

Topic: can't login (Read 915 times)

hani

Newbie

Posts: 1

can't login

« on: October 03, 2008, 10:15:33 AM »

Hi Supportforum,

sorry about my very bad english Roll Eyes

I have a Raq3 now. Serial console is working but i don't get the Login Promt. What is wrong? Can you help me?

Thx and best regard


	Logged

Davesworld

Administrator
Sr. Member

Posts: 296

I'm the same Dave who patches and compiles raqcop.

Re: can't login

« Reply #1 on: October 03, 2008, 05:53:04 PM »

Ok, first things first, you don't state what you actually have installed on the box and whether or not you have an updated rom or any other details we need.


	Logged

Main Daily Firewall: Cobalt Raq 4i modded to use a low voltage K6-III 1.8v 256k cache 500mhz clocked at 550mhz, VFD display. Raqcop 1.4.21

Others: One additional 4i for development left stock and two Symantec Velociraptor 500's with the 550mhz low voltage processor mod. Raq550, Two Raq XTR units

Pages: [1]

« previous next »

Jump to:

RaqCop / IPCop Software is Provided as is. No Warranty is Expressed Nor Implied. Use it at Your Own Risk!